Have you experienced “Stuttering” or “Hissing” or “Static “noise in your Bluetooth headphones? Have you encountered random audio cuts even when your Mobile Device is nearby? Well, I have, and I find it extremely annoying.
These “Bluetooth Stuttering” issues” are most likely caused by some sort of signal interference.
So, what are the possible Solutions and how can you avoid it?
We’ve got a few methods for you to try, and we’ll explain them in more details below.
1. Unpair the Devices and Reconnect them again.
2. Move away from the Source of Interference or Move the Source of Interference away.
3. C
heck and see if the Device has Bluetooth Connectivity Issues.
4. Bluetooth Version Upgrade?
5. Extend your Bluetooth Range?
This is probably what most people would try in this situation. This method should be able to fix all the minor connectivity issues and stabilize the connection.
Turn off your Headphones/Speaker and Restart it.
If the step above didn’t fix it, try Factory Resetting your Headphones/Speaker and pair them up with your device again.
Look around. Here are some possible sources of interference.
Physical:
Pillar, wall, your Roommate… basically anything physical. The worst “physical interference source” is metal obstacles… it can be a metal board or simply the fixtures in your concrete walls.Non-Physical:
WiFi Router, TV Streaming Device (Roku, Apple TV etc.), or another Bluetooth device.Once you’ve located a source of interference, either move them away or move away from them.
Please note that we’ve also seen cases where wireless signals from outside the apartment also managed to negatively affect the Bluetooth signal… causing the Bluetooth Headphones Stuttering issue, so please do look around.
In other words… check and see if it’s your Headphone/Speaker… or even your phone that’s the source of the issue. Maybe its Bluetooth antenna is damaged, or maybe you’ve just received a faulty product.
The easiest way to check is simple connecting it to something else and see if the same issue persists. You may also try going to an open area such as a park or a parking lot and test it out.
Cross check thoroughly so you can correctly pinpoint the source of the issue.
If it is your device that’s faulty… well, you know what to do.
If not, you’ll have to check around again for the source of interference… otherwise the issue will persist even if you purchase a new device.
Of course, the newer the Bluetooth version, the better/stabler the connection should be. As of right now (February 2021,) the newest Bluetooth version is Bluetooth 5.2. If your device’s Bluetooth version is below 4.2, please consider upgrading to a device that’s at least Bluetooth 5.0.
Newer version of Bluetooth doesn’t guarantee perfect connection, but it should greatly reduce the chance/frequency of Bluetooth breaking up.
Examples of Bluetooth 5.0+ Headphones…
This method only applies IF you have range requirements; if you’re just using the device on your mobile device, you most likely won’t need this.
On the other hand, if you’re going to be moving around the house while the “audio source” stays put (such as a conference call or watching TV with Bluetooth Headphones), you should consider using a Bluetooth “Extender” or a Bluetooth Transmitter Adapter.
A good Bluetooth Transmitter usually comes with Class 1 Bluetooth (Class 1 has better range than Class 2 but consumes more power) and can give you better range than direct connections.
Better range = Stabler Connections = Less chance of Bluetooth Stuttering.
Examples of Long-Range Bluetooth Transmitters:
Bluetooth Stuttering, Bad Bluetooth Range, Bluetooth Audio Cuts - 99% of these issues are caused by Interference issues. Find the Source of Interference = Fix the Issue.
Sometimes it takes a while to find it so please be patient and don't express your anger on the devices... otherwise you'll really have to buy a new one.
Still got questions? Feel free to leave them in the comment section below, we’ll get back to you within 24 hours. You may also contact us at support@avantree.com.
Edgar Cervantes / Android Authority
Robert Triggs / Android Authority
We first tackle the obvious question — is your Bluetooth even switched on? I know it may be a bit offensive to suggest such a thing, but we all have our dozy moments. So don’t shoot the messenger just yet. Switching on Bluetooth will then instantly make your other devices discoverable.
If you’re using an iPhone or iPad, go to Settings > Bluetooth and make sure the feature is toggled to green. Once it is, it will start looking for other Bluetooth devices nearby, including AirPods, Apple Watch, and other Bluetooth devices.
When it comes to Android devices, it depends upon which Android model you have. Various devices have slightly varying menu locations, making it difficult to give precise directions. But in general, go to the device settings, and there will be a Bluetooth option in there, along with a toggle button similar to iOS devices.
On Windows, start typing the word Bluetooth into the Windows start menu, and you will immediately get the link to access Bluetooth settings. Clicking that link will bring you to the Windows section for Bluetooth, where you can toggle on the setting.
With a Mac, go to System Settings > Bluetooth. Toggle on the feature, and it will begin searching for nearby devices.
The biggest pain in the neck regarding Bluetooth is that if a device is already paired with another device, you have to unpair it before using it with something else.
The biggest Bluetooth connection problem is headphones. If you’re listening with Bluetooth headphones to something on your phone and decide to listen to something on your tablet, you have to unpair the headphones from your phone first. Until you do, your tablet won’t detect the headphones. Not the most seamless of experiences.
So if your device is not detecting the Bluetooth device, check your other gadgets to see if one of them is paired with it instead. If so, unpair it, and you should be good to go (hopefully.) You can unpair the devices by tapping the Forget this Device setting.
The maximum range for Bluetooth is 30 feet (10 meters.) That means you can’t connect your headphones to your laptop and then go out for a walk. You also can’t allow anything like walls and other obstacles to get in the way of a Bluetooth connection.
So make sure the devices are very close to one another, and ensure there are no big thick obstacles. So, move your pet elephant out of the way.
There are usually a couple of different methods involved in pairing two devices via Bluetooth. Most of the time, you simply switch on Bluetooth, it discovers your other nearby devices, you tap the one you want, and off you go to the races.
However, there may be other times when Bluetooth pairing involves typing a sequence of numbers from the other device. Once you type that sequence of numbers, it authorizes the connection. This is common if you are trying to connect to a smart TV, for example.
So if the usual pairing sequence doesn’t work, see if a series of numbers is required instead. If it’s a smart TV, you’ll see it on the screen soon enough.
Anker
Bluetooth only really works at optimal levels if both devices are charged properly. It doesn’t always have to be at 100%, but if the battery hovers at around 15—20%, you will start having Bluetooth connection problems when Bluetooth goes into power-saving mode. So charge up both devices and then try to pair them again.
If you can’t wait for charging to complete, you may be able to disable the power-saving mode manually. Check online or the manual for that particular device to see if this is possible. But you still need to do some charging.
Robert Triggs / Android Authority
Bluetooth versions are often compatible, so this shouldn’t be an issue. However, there is a Bluetooth standard called Bluetooth Smart, and devices with Bluetooth Smart don’t recognize other Bluetooth versions.
Find out if one of the devices has Bluetooth Smart and the other one doesn’t. If so, there’s your issue right there. If that’s the case, there’s nothing you can do about it.
Robert Triggs / Android Authority
Edgar Cervantes / Android Authority
Smart home devices — such as hubs, locks, light bulbs, plugs, and more — use something called Zigbee. Like Wi-Fi and USB, Zigbee uses the same GHz spectrum as Bluetooth devices, which will interfere with device pairing. Therefore, you need to move away from your Zigbee devices when attempting to pair something via Bluetooth.
Once the pairing has been successfully completed, you can let Zigbee back into your life again.
If you stand too close to Wi-Fi hotspots and USB connections, this can also negatively affect Bluetooth. You can usually re-enable these once you have successfully paired your Bluetooth devices.
Like Zigbee smart home devices, Wi-Fi and USB affect Bluetooth due to them using the same 2.4 GHz spectrum as Bluetooth. Therefore, the signals overlap and interfere with one another.
Zak Khan / Android Authority
If you have told your device to “forget” a Bluetooth device, it will then become necessary to restart your device.
Restarting an iPhone involves holding the volume down button and power button. When the slide to power off slider appears on-screen, swipe to the right.
The option to power off an Android phone can vary, depending on your model of phone. But generally, you can swipe down from the top of the screen to access various settings, including a power-off button.
For Windows computers, the restart option is in the Start Menu.
On Mac computers, click the Apple icon at the top-left of the screen and select Restart.
If you’ve come this far without success, then it is very possible that one of your devices has a hardware defect. You will need to contact the device manufacturer to examine it if this is the case. This should finally clear up any Bluetooth connection problems, but we want to hope it doesn’t get this far.
As the name implies, a Bluetooth jammer device blocks Bluetooth signals. It can be used to stop noisy parties next door if the music player is operating on Bluetooth or if someone is continually trying to hijack your Bluetooth connection. However, you should be aware that owning a Bluetooth jamming device (or any signal jamming device), is illegal in the United States under federal law. There are no exceptions.
Yes, a microwave oven can cause electromagnetic interference with Bluetooth signals.
As of April 2023, the latest Bluetooth version is 5.4.
No, Bluetooth cannot penetrate walls.
Yes. Low temperatures have been proven to affect Bluetooth performance.
Theoretically, yes. However, since the maximum Bluetooth distance is 30 feet (10 meters), the person would have to be standing very close to you.
Eavesdropping is when someone else listens to or intercepts data intended for another device. This can be prevented by a Bluetooth feature that uses a frequency-hopping spread spectrum designed to prevent this from happening.
Yes, there is no danger as far as the Bluetooth aspect is concerned.
Definitely Wi-Fi. It has a speed of at least 54 Mbps, compared to only three Mbps for Bluetooth. Bluetooth is not designed for transferring large amounts of data.
Comments
Please Join Us to post.
0